or just click to select the text and then click on the text tool bar on the left or the right side of the page. If your attempts to edit add numbers over the top, then undo and retry. Do this by double clicking on them and then when you get the text cursor you can edit them. If you paste it in and it isn’t lined up, you can move it and it will snap to the other layer so it will be lined up perfectly.Īfter pasting, they may not line up, so move it if you need to. With both layers visible, you should not be able to tell them apart, but you can toggle which one you see hiding or viewing it in the layer viewer. CTRL+C will copy everything that is selected.Select all (CTRL+A) or draw a box around everything If you can’t select anything on the layer, you can right click on the layer and select unlock all and then unhide all to see everything. Don’t mess with the lock or you won’t be able to edit or select anything in that layer. If the eye is black with eyelashes this is viewable, if greyed and looks closed, then it is hidden. In the layer viewer on the right, you can select which layer is visible by clicking on the eye. Move the tab layer below the first layer as a matter of convention because it is intuitive that the top layer gets cut first, then the tabs at the bottom get cut last. You can close the dialog and delete the arrows.-rename it “tabs” by using the right click menu. Click the“Apply” and you will see arrows appear on your drawing, it means you have finished your G-code file making.ĥ. The filename more than 8 characters and also include “~”Ĥ. *Filename may include number or english characters and should be less than 8 characters.Ĭan’t use “~” cubiio_1.txt (Y) correct cu~biio123.txt (N) error. Uncheck “Add numeric suffix to filename”. This is the folder that you want to save your output filesġ. You can adjust speed and power in the APP. Suggestion: Setting the max power(255)/speed(600mm/min). Paste the files into /Applications/Inkscape.app/Contents/Resources/palettes.Įxtensions -> Generate Laser G-code -> J Tech Photonics Laser Tool Paste the files into /Applications/Inkscape.app/Contents/Resources/extensions.Ģ. Unzip the file and copy the contents in "extensions". Paste the files into C:\Program Files\Inkscape\share\palettes.ġ. Paste the files into C:\Program Files\Inkscape\share\extensions.Ģ. Unzip the file and right click on applications of InkscapeĬlick the “Show package contents” and put all of unzipped files in /Applications/Inkscape.app/Contents/Resources/extensionsġ. If you install in D drive or other folders, same with same as aboveĮx: D drive “D:\Program Files\Inkscape\share\extensions”…etc. Unzip the file and put all of unzipped files in “C:\Program Files\Inkscape\share\extensions” Please check our instructions below for more details. You can create vector graphics and convert them to G-code files with G-code extensions. Inkscape is an open-source vector graphics editor similar to Adobe Illustrator, Corel Draw, Freehand, or Xara X. If you don’t have any experience, follow our instructions about converting vector graphics to G-code files with Inkscape. Please check our supported command list.ī. You can do it with your favorite software. Convert Vector Graphics to G-code filesĪ. Otherwise, there are plenty of galleries on line that allow you to download.Ģ. If you don’t have any experience of vector graphics, we recommend “Inkscape”.*Ĭ. ![]() You can do it with your favorite software such as Illustrator, Corel Draw…etc.ī. To generate G-code files, you need to do two things:ġ. G-code files are script files that describe paths, speeds, and the max power of your drawings. If you want Cubiio to engrave along the path of your drawings, you need to convert your drawings to G-code files.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |